IEC62196-1 Pull Force And Torque Test Apparatus For EV Plugs And Connectors Cable Anchorage

Description

Detail Information

Standard: IEC 62196-1 Torque Arm: R100mm Pull Frequency: 1 Cycle/s Pull Cycles: 1-9999 Cycles Voltage: 220V Test Station: 1 High Light:

iec 62196 1 torque test apparatus

,

single station torque test apparatus

Product Description

IEC 62196-1 Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus​

 

Product Information For Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus​:

 

This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque.

 

It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and table 11, IEC60309-1: 2012 clause 23.3, etc.

 

Principle For Vehicle Plugs And Connectors Cable Anchorage Pull Force And Torque Test Apparatus​:

 

Pull is realized by single-phase speed-regulating motor to drive the eccentric mechanism, the motor speed is adjustable, to ensure the accurate time for each pull force applied; torque is achieved by releasing the torque weight by air cylinder.

 

Technical Parameters For Vehicle Plugs An​d Connectors Cable Anchorage Pull Force And Torque Test Apparatus​:

 

Operation Method	Button operation
Drive Mode	Motor and cylinder
Pull Force Weights	One set of pull force weights Can achieve 160N, 200N, 240N, 250N,500N, 600N
Torque Weights	One set of torque weights Can achieve 0.6N.m, 0.7N.m, 1.2N.m, 1.5N.m, 2.3N.m, 11N.m
Torque Arm	R100mm(Ф200mm)
Pull Frequency	1cycle/s
Pull Cycles	1-9999 cycles, can be preset, default 100 cycles
Torque Applied Time	0-99H59M59S, can be preset, default 1min
Fixture	One set of universal fixtures
Equipment Dimensions & Weight	W1600*D500*H1200mm, the whole machine is about 150Kg
Power Supply	Single phase AC220V±10%, 60Hz, 10A